Posted on Leave a comment

Hawk Brake Bedding-in Procedure:

 

  • Step 1:Make 6-10 slow-downs from approximately 30-35 mph to 5 mph. applying moderate pressure. Do not come to a complete stop.
  • Step 2:Make an additional 2 to 3 harder stops from approximately 40-45 mph. to zero.
  • Step 3:DO NOT DRAG THE BRAKES! (after stopping – do not leave your foot on the brake pedal)
  • Step 4:Allow 15 mintutes or more for the brake system to cool down.
  • Step 5:Your new Hawk pads are ready for use.

 

 

Leave a Reply